Oprogramowanie firmowe do czytnikw serii MCTxxE-IO
Copyright Roger Sp.z o.o. sp.k.

Notes to firmware versions:
MCX402DR-x.hex -> Firmware for operation with PRT readers (RACS CLK/DTA). It can be also used to convert PR402DR and PR402DR-BRD controllers (RACS 4 system) into MCX402DR expanders
MCX402DR12VDC-x.hex -> Firmware for operation with PRT (RACS CLK/DTA) and Wiegand readers. It is used ONLY for conversion of PR402DR-12VDC and PR402DR-12VDC-BRD controllers (RACS 4 system) into MCX402DR expanders.
MCX402DR-WG-x.hex -> Default factory firmware for operation with Wiegand readers. It can be also used to convert PR402DR and PR402DR-BRD controllers (RACS 4 system) into MCX402DR expanders
========================================================================

v1.x_fv1.0.4.259    			27.06.2018
------------------------------------------
1. Improvment of compilation code.

v1.x_fv1.0.2.255    			11.09.2017
------------------------------------------
1. Corrected critical error related to loss of communication with controller.
2. Corrected critical error related to card/PIN reading.
3. Increased IMAX line delay for transistor outputs.
4. Corrected operation with Wiegand readers.


v1.x_fv1.0.2.226    			09.07.2016
------------------------------------------
First commercial version of the firmware.

