MCT68ME-IO Proximity Reader

MCT68ME-IO Proximity Reader

The MCT68ME-IO is an access terminal dedicated to RACS 5 access control and building automation system. The terminal is a peripheral device connected to access controller.
The terminals can read serial numbers (CSN) of MIFARE and EM 125 kHz proximity cards. The MCT68ME-IO is equipped with input and output lines which enable full control of door without the need to use the inputs and outputs located on the access controller or expander. The terminal offers three NO/NC inputs, two transistor outputs and one relay output. Each of the outputs can be switched off by default (Normal polarisation) or switched on by default (Reversed polarisation).
The communication with controller is provided via modified RS485 standard and it enables such topologies as star or tree. The communication bus maximal length cannot exceed 1200 m and it can be made with any signal cable (e.g. UTP/U cat.5).
The MCT68ME-IO is equipped with 4 line LCD and four programmable function keys which can be used among others to register Time&Attendance modes. The terminal is recommended for Time&Attendance applications.

Order guide

MCT68ME-IO Proximity Reader
  • MCT68ME-IO-I
    EM 125 kHz and 13.56 MHz MIFARE (CSN) access terminal with keypad and display;
    on-board I/Os; indoor version

  • MCT68ME-IO-O
    EM 125 kHz and 13.56 MHz MIFARE (CSN) access terminal  with keypad and display;
    on-board I/Os; outdoor version with metal protection enclosure

Features

  • authentication by Card and/or PIN
  • EM 125 kHz, MIFARE Classic card reader
  • CSN card readout
  • RS485 communication interface
  • 3 inputs
  • 2 transistor outputs
  • 1 relay output
  • 4 function keys
  • tamper contact
  • outdoor environment (refers only to MCT68ME-IO-O)
  • 12 VDC power supply
  • CE mark