PRT12MF MIFARE® Proximity Reader

PRT12MF MIFARE® Proximity Reader

Each PRT12MF series reader can be used as a universal identification point connected to the access controller or configured for autonomous work, as a simple access controller for a single door.
In the first case, the reader’s functionality is limited only to reading an identifier (card/PIN) and sending data to an external controller, which takes further action. In case of work in a standalone mode, PRT12MF terminals can independently supervise a single door using data entered in the process of their configuration.

NOTICE! Functionality of PRT readers has been upgraded - Read more ...

Order guide

PRT12MF MIFARE® Proximity Reader
  • PRT12MF-G 
    ISO/IEC 14443A/MIFARE outdoor proximity reader with keypad

  • PRT12MF-BK-G
    ISO/IEC 14443A/MIFARE outdoor proximity reader

  • PRT12MF enclosure consists of front panel and base. New device is assembled with a standard base, but additional free of charge, extended base is included. The extended base can be used when connection cable has to be hidden and no flush mounting box is available


  • power supply 12 VDC
  • 13.56 MHz MIFARE cards
  • reads CSN, MSN or SSN number
  • programmable data output format
  • formats: Wiegand 26-66bit, Magstripe (Clock and data), RS232, RACS (Roger) and others
  • various ways of PIN and keypad codes transmission
  • LED and Buzzer controlled through separate inputs
  • outdoor/indoor installation
  • MIFARE card programming (when operate under RARC freeware software)
  • may operate as an offline standalone access controller
  • up to 120 indexed users with card and/or PIN (standalone mode)
  • authentication: Card and/or PIN
  • event log for 1024 transactions
  • built-in 1.5 A/30 V relay output (PRT64MF & PRT66MF readers only)
  • two NO/NC inputs
  • two 150 mA transistor outputs
  • operation with XM-2 I/O extension module
  • possible connection of the external PRT series reader (two way door control)
  • programmed manually or from PC
  • free managing software (RARC)
  • tamper
  • average current consumption 85 mA (65 mA for version without keypad)
  • reading range up to 6 cm
  • weight: ≈150.0 g
  • CE mark
  • environmental conditions of operation:
    • temperature from -25°C to +60°C
    • humidity from 10% to 95%
  • dimensions (height x width x thickness):
    • with standard enclosure base: 152.5 x 46.0 x 23.0 mm
    • with extended enclosure base: 152.5 x 46.0 x 35.0 mm